Help! My front wheel on a 1968 R60/2 is not centered in the swing arm frame. It is close to the left swing arm. and at least an inch from the right swing arm( brake side). The bearings seem to be space properlly on the axel and the axel is fully seted in the swing arm.
I also have a 1966 R60/2 that has a much smaller diameter front axel than the 68 and a bushing inserted in the brake side of the swing arm to snug up the axle diameter. What are the difference in axle diameter and any suggestions as to how to center the wheel in swingarm frame would be much appriciated.