Search found 5 matches

by Daniel Andrada
Thu 13. Nov 2008, 05:08
Forum: Restoration forum
Topic: Noisy Valve Clatter
Replies: 8
Views: 10694

Re: Noisy Valve Clatter

I am referring to worn out cylinder walls of the tappets guide which can cause excessive side play of the tappets.
by Daniel Andrada
Wed 12. Nov 2008, 09:20
Forum: Restoration forum
Topic: Noisy Valve Clatter
Replies: 8
Views: 10694

Re: Noisy Valve Clatter

could be tappets and tappets guide are worn out and need to be replaced.
by Daniel Andrada
Sun 9. Nov 2008, 06:11
Forum: Restoration forum
Topic: R26 Bj. 1960 mit Defekt - Kolbenfresser?
Replies: 2
Views: 6429

Re: R26 Bj. 1960 mit Defekt - Kolbenfresser?

Hallo, Er scheint, dass Sie stucked herauf Maschine oder Getriebe haben. Von um Ihr Problem zu lokalisieren, trennen Sie die Maschine vom Getriebe und schauen Sie wo stucked herauf Bedingung kommt. Traurig, wenn die Sprache nicht als i-unterhaltender on-line-Übersetzer von englischem zum Deutschen k...
by Daniel Andrada
Tue 4. Nov 2008, 17:06
Forum: Restoration forum
Topic: overheating of R26
Replies: 4
Views: 10934

Re: overheating of R26

[size=small]Is it overheating at idle or when running? The reason I've asked is you might be running on lean mixture. try adjusting the the slide pin up one notch/hole and observe if at full throttle the exhaust pipe don't get red hot[/size]
by Daniel Andrada
Sat 31. Mar 2007, 14:16
Forum: Restoration forum
Topic: Main stand - Centre stand R26
Replies: 3
Views: 6534

Re: Main stand - Centre stand R26

The machine is heavy to put into center stand. Perhaps you needs some help and a
little practice to be able to lift at the same time pulling backward on the
bike. You must have a good grip on the frame member just before the rear shocks.
I hope this helps.