What year is it/4 ring piston/Bing1/22/50

Restoration forum Bmwbike.com
Post Reply
bmwx5
Posts: 3
Joined: Thu 25. Nov 2010, 11:19

What year is it/4 ring piston/Bing1/22/50

Post by bmwx5 »

I am restoring an R25/3 from 2 bikes.What is the production date of frame & engine no 328442 also frame no. 301550 & engine no. 328805.Both engines have 4 rings per piston and are size 68.5. One has 'Sp006'on it.What ring set do I need.Iam useing carby.Bing 1/22/50 what model is it from, where can I find a parts list for it.To tune it what notch do I set the float & slide needle in .Which jets & needle will make work best for my engine.This is my first post I hope Mark & someone can answer all my questions.
Kurt in S.A.
Posts: 28
Joined: Wed 13. Jan 2010, 04:25

Re: What year is it/4 ring piston/Bing1/22/50

Post by Kurt in S.A. »

The production models were 1953 to 1956 with over 47000 bikes produced. VINs ran from 284001 to 331705. Your 32xxxx numbers probably indicated a 1956 model whereas the 30xxxx number is probably a 1954 or 1955.

Piston size 68.5 is 1st overbore...standard size was 68mm.

My Bing catalog doesn't show a 1/22/50 carb. Documents I have show that the early bikes had carbs 1/24/41 and then from October 1953 they had 1/24/42. Your carbs are 22mm opening...the stock carbs were 24mm. Contact Bing for more information - http://www.bingcarburetor.com/

Kurt in S.A.
Post Reply