R25/3 rear seal

Restoration forum Bmwbike.com
Post Reply
bmwx5
Posts: 3
Joined: Thu 25. Nov 2010, 11:19

R25/3 rear seal

Post by bmwx5 »

I am about to assemble my engine.Can I fit the rear seal (for flywheel) before
heating the engine case to 100 degrees centigrade and fitting the crankshaft ?
It looks as if it will be easier to fit the seal first as there is no lip to stop the seal going in crooked or too deep and if it does I can always tap it back out.
Post Reply