Page 1 of 1

R26 Field Windings / Generator Questions

Posted: Mon 14. Apr 2014, 18:18
by barnstorm
My R26 is not charging.

I have replaced the wiring harness with a new one.

The original voltage regulator is missing.

I am using a new solid state voltage regulator.

I have two wires coming from behind the regulator mounting plate.

One is orange-red the other is yellow.

Is the yellow cable the Field Winding that gets attached to DF?

Re: R26 Field Windings / Generator Questions

Posted: Mon 13. Oct 2014, 10:29
by Howdy
Hello,

If you still need the Info, i can send you a wiring Scheme for the Generator.
Pls send your Mail address:

markus.ineichen@bluewin.ch

Markus

Re: R26 Field Windings / Generator Questions

Posted: Wed 27. Jul 2016, 23:33
by KAROUSSIS
In my R26 1956 the batt is not charged any more. It was OK
last week.I checked the generator, conduct points, regulator
(I use BOSCH 7V 45A), ignition coil, everything seems OK.
Can anybody send me a diagram showing the connbections
generator-batt-conduct points-regulator-...Thanks

Re: R26 Field Windings / Generator Questions

Posted: Sat 14. Jan 2017, 15:12
by terwog
You may need to flash the gen....terry

Re: R26 Field Windings / Generator Questions

Posted: Wed 23. Jan 2019, 04:29
by yjr32
Flashing the generator means momentarily touching battery live wire to the field terminal. This restores the residual magnetism in the field circuit which is essentially required for the generator to buildup voltage to start charging.

Janardhana Rao.