R50 Crankshaft gear puller
-
Ian MacDonald
R50 Crankshaft gear puller
Does anyone have a drawing of the BMW tool or the universal tool show in Slabons 'How to restore your BMW' page 215 ref 499/1/2 so I can make one prior to stripping my R50 engine.
-
Daniel
Re: R50 Crankshaft gear puller
you can find matra tools catalog on beemer's
http://www.beemergarage.com/documents/tools368.pdf
Hope you find what you need, cheers.
http://www.beemergarage.com/documents/tools368.pdf
Hope you find what you need, cheers.
-
Allan Atherton
Re: R50 Crankshaft gear puller
You can get a single tool that does the job of several Matra tools for stripping the engine.
See Ed Korn's Cycleworks site:
http://www.cycleworks.net/#Engine
MANY-IN-ONE TOOL all TWINS 1951-1969
To remove the crankshaft so you can clean the slingers, you gotta have this one. It holds the flywheel, removes the timing case cover, crankshaft timing gear, front bearing carrier, camshaft timing gear from the camshaft, rear main bearing and the flywheel. It will also press back on the front bearing carrier, both timing gears, rear main bearing and the generator ball bearing. Replaces Matra numbers 282 292 311 355a 499 499/5 535 536 5038 5038/1 5039......$222 (4.5 lb.)
See Ed Korn's Cycleworks site:
http://www.cycleworks.net/#Engine
MANY-IN-ONE TOOL all TWINS 1951-1969
To remove the crankshaft so you can clean the slingers, you gotta have this one. It holds the flywheel, removes the timing case cover, crankshaft timing gear, front bearing carrier, camshaft timing gear from the camshaft, rear main bearing and the flywheel. It will also press back on the front bearing carrier, both timing gears, rear main bearing and the generator ball bearing. Replaces Matra numbers 282 292 311 355a 499 499/5 535 536 5038 5038/1 5039......$222 (4.5 lb.)