Salut à tous, quelqu'un a-t-il des astuces pour un extracteur fait "maison pour remplacer l'outillage matra 499 et/où 355 + douille 5038...enfin tout "qui va bien" pour démonter la mécanique r69s...merci
Hello with all, somebody has it easy ways for an extractor makes "house" to replace the tools Matra 499 et/où 355 + casing 5038... finally very" which well "will dismount mechanics r69s thank you...
tools
-
Allan S. Atherton
Re: tools
Could you be looking for the "Many-In-One" tool that is sold by Ed Korn of Cycle Works? It replaces several Matra tools for entering the engine and removing the crankshaft.
http://www.cycleworks.net/
MANY-IN-ONE TOOL all TWINS 1951-1969
To remove the crankshaft so you can clean the slingers, you gotta have this one. It holds the flywheel, removes the timing case cover, crankshaft timing gear, front bearing carrier, camshaft timing gear from the camshaft, rear main bearing and the flywheel. It will also press back on the front bearing carrier, both timing gears, rear main bearing and the generator ball bearing. Replaces Matra numbers 282 292 311 355a 499 499/5 535 536 5038 5038/1 5039......$222 (4.5 lb.)
http://www.cycleworks.net/
MANY-IN-ONE TOOL all TWINS 1951-1969
To remove the crankshaft so you can clean the slingers, you gotta have this one. It holds the flywheel, removes the timing case cover, crankshaft timing gear, front bearing carrier, camshaft timing gear from the camshaft, rear main bearing and the flywheel. It will also press back on the front bearing carrier, both timing gears, rear main bearing and the generator ball bearing. Replaces Matra numbers 282 292 311 355a 499 499/5 535 536 5038 5038/1 5039......$222 (4.5 lb.)