Hallo Leute,
kennt jemand von euch denn die genaue Bezeichnung des Lenkkopfkegelrollenlagers für die R 25/2? Ich hab noch die alten Lagerschalen drin und würd nun gerne wechseln. Die Lager könnte ich dann in meiner Fa. beziehen. Danke
Wolfgang
Lenkkopfkegelrollenlager f. R25/2
-
Mark Huggett
Re: Lenkkopfkegelrollenlager f. R25/2
Hi Wolfgang
The bearings in question were first introduced by BMW in 1936 with the R5. Since then, all models from the R5; R6; R51 through to R71; after the war, R24 through to the R69S all used the same steering head bearings. This is a non standard bearing which was only produced by FAG and SKF. It consisted of 2 rings with the same identification number.
FAG number was 200185
SKF number was 255243
Note that these were non-standard bearings which were only manufactured purely for BMW.
However, these have both been discontinued over 25 years ago and are no longer available. That is why we manufactured the taper roller bearing which we sell as a replacement for the old system. Our part number for a complete set is 31 42 2 000 000. This is also a non standard size bearing so you will not find it from a normal bearing supplier.
Best regards,
Mark
Mark Huggett GmbH
The bearings in question were first introduced by BMW in 1936 with the R5. Since then, all models from the R5; R6; R51 through to R71; after the war, R24 through to the R69S all used the same steering head bearings. This is a non standard bearing which was only produced by FAG and SKF. It consisted of 2 rings with the same identification number.
FAG number was 200185
SKF number was 255243
Note that these were non-standard bearings which were only manufactured purely for BMW.
However, these have both been discontinued over 25 years ago and are no longer available. That is why we manufactured the taper roller bearing which we sell as a replacement for the old system. Our part number for a complete set is 31 42 2 000 000. This is also a non standard size bearing so you will not find it from a normal bearing supplier.
Best regards,
Mark
Mark Huggett GmbH
-
Lloyd Lounsbury
Re: Lenkkopfkegelrollenlager f. R25/2
I would like to obtain your price and availability of the steering head bearing sets taper roller for old BMW....They are the same size as the RAM Dnepr bikes we market in the USA.....Thankyou
Lloyd....RAM Seattle
Lloyd....RAM Seattle