Rear Suspension - R 25/3
-
Colin Anderson
Rear Suspension - R 25/3
Can anyone tell me how to remove the rear plungers from the frame ?
-
rolf
Re: Rear Suspension - R 25/3
Hallo,
1. unsrew the big, chromed nut and all other srews
2.you have to remove the long metaltube(inside the spring) by knocking with a hammer an another metaltube(with a diameter 1 or 2 mm less[more little]) from the bottom and then (normally) grip the tube at the top and remove it by throwing it with little turnings.Attention:
some 25/3 had a extra screw , which fixed the tube underneath,it was screwed inside the tube(SW 22 or 24, I do not know exactly in the moment).
3. press the spring by hand, and remove the plunger by turning it a little bit to the outerside of the frame.
if there are some difficulties (with my english or by doing it), ask again.
rolf
1. unsrew the big, chromed nut and all other srews
2.you have to remove the long metaltube(inside the spring) by knocking with a hammer an another metaltube(with a diameter 1 or 2 mm less[more little]) from the bottom and then (normally) grip the tube at the top and remove it by throwing it with little turnings.Attention:
some 25/3 had a extra screw , which fixed the tube underneath,it was screwed inside the tube(SW 22 or 24, I do not know exactly in the moment).
3. press the spring by hand, and remove the plunger by turning it a little bit to the outerside of the frame.
if there are some difficulties (with my english or by doing it), ask again.
rolf