Page 1 of 1

Brake Light wiring

Posted: Mon 5. Feb 2001, 02:16
by David
Another simple question -- there are three wires leading to the Eber brake light. All three start at the 5 pole terminal, and two obviously go to the two screws in the housing, but where does the third go? From the wiring diagram, it doesn't look like aground...

Thanks again in advance...

David

Re: Brake Light wiring

Posted: Tue 6. Feb 2001, 11:29
by Mark Huggett
Hi David
I presume that you have an R26. One wire is brake light.
One wire is taillight.
One wire is earth.

Regards,

Mark
Mark Huggett GmbH