R25 Pin Strips

[Don McGuire]

Does anyone know the thickness ( mm or in.) of the pin strips and space between,
on the tank and fenders of a R25/3.
Thanks, Don

[Karl]

Hallo Don,

(english text below)

zuerst mal auf Deutsch:

Ich stehe kurz vor dem gleichen Problem - der Linierung meiner Kotfluegel und des Tanks. Vor einigen Monaten hat mir mal jemand gesagt, dass die Linierung einer R25 wie folgt auszusehen hat:

Faustformel:
Breiter Streifen 5mm,
schmaler Streifen 1,5mm,
Abstand dazwischen 4mm.

Keine Ahnung, ob das die "Original"-Werte sind - ich hoffe, sie stimmen.

Viele Gruesse,

Karl

PS.: Besuch doch mal meine R25-Seite:

www.r25-bike.de


English-Text:

Hi Don,

(sorry for my poor english)

I have a R 25 and had this problem, too. Someone told me, that the pin strips should be with these measures:

Thick strip: 5 mm
Thin strip: 1,5 mm

The gap between them: 4 mm

The restauration of my R 25 is going on slowly, so I am not yet at the poit of making this strips (I think I will make it in the next 1 or 2 months).

With best regards,

Karl

PS.: Have a look at my R25-site:

www.r25-bike.de

[Ben]

Hello Don

The tank of my r25/3 has been painted about one hundred times and in just about as many colors.
However I did manage to "dig down" to the original coat and I believe some of the original pin striping.

The measurements I have on this tank are as follows

Thick line 5mm
The gap between 4mm
Thin line 1.5mm

So these figures agree with Karls

Ben

[Allan Atherton]

From an old Tips response, I saved this, which agrees with what Ben and Karl found:

The official pinstripe layout decided by Mr. Huggett with BMW in Munich is as follows:
Wide line: 5mm
Narrow line: 1,5mm
Distance between the two lines: 4mm