Page 1 of 1
Horn & Indicator switch - R 25/3
Posted: Sat 6. Oct 2001, 06:39
by Colin Anderson
Can anyone tell me what I need for the above. Do I have to change theclutch lever assembly
to the Magura type ?
At present, my bikes have Yamaha (!!!!) switch system installed which is integral with the handgrip and clutch lever.
Any help would be much appreciated.
Re: Horn & Indicator switch - R 25/3
Posted: Sat 6. Oct 2001, 07:37
by Mark Huggett
Hi Colin,
You require the complete Magura clutch armature assembly with the BMW parts number 32 72 2 072 112 which costs CHF 85.00. The part that holds the dimmer switch 61 31 8 048 162 is an intergrated part of the zinc casting which holds the clutch lever etc.
Best regards,
Mark
Mark Huggett GmbH
Re: Horn & Indicator switch - R 25/3
Posted: Mon 8. Oct 2001, 00:22
by Colin Anderson
How is it fitted ? I can't find anything in the workshop manual. Any advice / pictures would help
Re: Horn & Indicator switch - R 25/3
Posted: Mon 8. Oct 2001, 16:37
by Mark Huggett
Colin,
As mentioned before the switch fits onto/into an intergrated moulding of the zinc die-cast clutch lever armature on the handle bar.
It is locked in position by an AM4 x 6 filister head screw.
Best regards,
Mark
Mark Huggett GmbH.