Page 1 of 1

Steel rims

Posted: Thu 22. Apr 1999, 02:07
by Pierre Michaud
Mark,
what does the 1x crossed mean in the description for rims. Is the 2.5 x 18 part 36314038220 steel rim Italien or Shurmann? My shop manual recommends using 2.15B in front and 2.75C in rear for sidecar operation. Would 2.5 and 3.0 be ok?

Re: Steel rims

Posted: Fri 30. Apr 1999, 09:20
by Mark Huggett
Hi Pierre

The early swinger model twins from 1955 till about 1957 had a different spoke configuration. The spokes were 126mm long and were crossed only once (spoke pattern) thereafter the angle was changed requiring a longer spoke (140mm and crossed twice) and therefore also different rim and wheel hubs.

Best regards,

Mark
Mark Huggett GmbH