Forum bmwbike.com

Dear Mark,

I've few problems with my clutch (R50 1956). I've checked with your spare parts offers and notice that you have a 5mm and 7mm. What is the difference between both and which one would better fit my motorbike?

Thanks for your advice.

Gerald

Hi Gerald
The R50 has 3 different clutch plates namely 5; 7 and 9mm depending on clutch assembly. What I have to know is exactly how your clutch assembly looks eg. Is the pressure ring flat and bolted directly onto the pressure plate?
or:
Is there a large spacer ring between pressure plate and pressure ring?
or:
Are there 6 small spacer rings between pressure plate and pressure ring?
or:
Does the pressure ring have a recess in it as compared to a flat ring?

Regards,

Mark
Mark Huggett GmbH