Sonderzubehör Drehzahlmesser f.R50/2
Posted: Sun 26. Jan 2003, 22:48
Ich suche für meine BMW R50/2 BJ.62 eine Drehzahlmesser wie er bei der R69/S als Sonderzubehör gegeben hat.
Adding a tach is expensive and complicated, because the parts not the same for all bikes. I know your bike is 1962, and the following information is for a 1967 bike, and is English, not German. But it does show the cost and complexity of adding a tachometer.
---------------------------------------------------------
From: Brian Rozema rozemab@v...
Date: 2001
Subject: Adding a Rev-Counter to my 1976 /2
Parts Needed:
qty P/N Desc.
1 61138080160 Rubber Grommet
1 62138080151 2:1 Rev counter
1 62138080152 Rev counter gear drive
1 62138080156 Drive Cable
1 ? Rev counter mount (to shock tube?)
1 11140002171 Gasket
3 07119919937 Mounting Screws
…If you remove the little triangular plate you'll (hopefully) see a little gear hanging down. This is the gear with which the tach drive will mesh. If the gear is not there you'll have to buy one of the
camshaft-driven tach drives.
The placed to Huggett was as follows:
For the newer tach setup:
**Don't forget the oil pump drive gear!!!! ******
Article-number Qty. Item Total (Price in CHF)
--------------------------------------------
07 11 9 919 937 6 1.20 7.20
11 14 0 002 171 6 1.46 8.76
13 72 0 043 119 2 4.10 8.20
62 13 8 080 151 1 152.00 152.00
62 13 8 080 156 2 26.00 52.00
62 13 8 080 159 1 530.00 530.00
--------------------------------------------
Article-list:
Article-number Article description
--------------------------------------------
07 11 9 919 937 Fillister head screw AM6x40 V2A
11 14 0 002 171 Rev counter drive gasket, R50-2; R50S; R69S
13 72 0 043 119 Air filter cork gasket, R50 - R69S
62 13 8 080 151 Rev counter 1:2, from June '65
62 13 8 080 156 Rev counter drive cable R50-2 - R69S, from June '65
62 13 8 080 159 Rev counter, angular drive, from June '65
-----------------------------------