R50/2 Transmission problems
Posted: Sat 14. Aug 1999, 19:09
Currently, my /2 transmission is apart for a rebuild. Here is the problem: Upon putting the
transmission back together, it turns out that IT WILL SHIFT without the rear cover
installed, but WILL NOT WITH the rear cover installed. I think it is shimmed correctly.
Obviously,the transmission won't operate on the bike without the back cover,
so this is a major dilemma.What could be causing it? Any help would be greatly
appreciated!
transmission back together, it turns out that IT WILL SHIFT without the rear cover
installed, but WILL NOT WITH the rear cover installed. I think it is shimmed correctly.
Obviously,the transmission won't operate on the bike without the back cover,
so this is a major dilemma.What could be causing it? Any help would be greatly
appreciated!