Page 1 of 1
1939 R66 float required
Posted: Fri 7. May 2004, 08:04
by Gerry Douglas-Sherwood
One float on the R66 I work on has a hairline crack. The float is original. Parts are extremely difficult to come by. Is there a model of British Amal that would fit (unlikely), or does someone know of a good repairer or manufacturer of one-off floats? All advice welcome.
Re: 1939 R66 float required
Posted: Wed 12. May 2004, 09:32
by Bruce Frey
Re: 1939 R66 float required
Posted: Wed 26. May 2004, 07:24
by Gerry Douglas-Sherwood
Nylon floats are available of almost identical dimensions. They are just a little shorter, but the needle valve can be raised appropriately with washers.
Suppliers:
Autocycle Engineering
Kingsley Street
Netherton
Dudley
W.Midlands
DY2 0QA
UK